Þegar öllum leiðbeiningum er fylgt, er própan mjög öruggt til notkunar og er stöðugur og tryggur orkugjafi. Aðal hættan við notkun á própani kemur til ef búnaður er ekki rétt tengdur, lítið eða ekkert viðhald á búnaði eða við notkun á ósamþykktum búnaði. Við notum og útvegum eingöngu búnað sem er fyllilega í samræmi við ströngustu kröfur og er samþykktur af yfirvöldum.
1. Lesið vel leiðbeiningar fyrir notkun
Sjáið til þess að öllum leiðbeiningum sé fylgt við samsetningu sem og notkun á própani. Ef þú ert í vafa hafðu þá samband við söluaðila þess búnaðar sem nota skal. Reynið aldrei að gera við stjórntæki, þrýstijafnara eða gashylki.
2. Geymsla á hylkjum
- Það er leyfilegt að geyma 25 kg af propani, þ.e. tvö 10 kg hylki í heimahúsi eða bílskúr. Stærsta leyfilega hylkjastærð er 11 kg.
- Gashylki má aldrei geyma á háalofti, kjallara eða geymslu neðanjarðar. Própan má heldur ekki geyma inni í húsbílum, bátum eða sambærilegum rýmum sem gist er í.
- Geymið hylkið ávallt í uppréttri stöðu þar sem það verður ekki fyrir miklum utanaðkomandi hita eða þar sem hylkið getur orðið fyrir einhverjum skemmdum frá nálægum hlutum eða tækjum. Própan hylki skulu geymd á læstum stöðum eða þar sem ekki er óhindraður aðgangur utanaðkomandi. Þar sem própan hylki eru geymd skal sjá til þess að nægjanleg loftræsting sé til staðar.
- Gashylki á aldrei að nota eða geyma undir grillinu, þar sem hitastigið á utanverðu gashylkinu má ekki fara yfir +40°C. Skrúfið ávallt fyrir hylkið að notkun lokinni. Gashylkið á ávallt að geyma í uppréttri stöðu.
3. Staðsetning própanhylkis
- Própanhylki á alltaf að nota í uppréttri stöðu. Geymið hylkið þar sem það verður ekki fyrir utanaðkomandi hita eða getur orðið fyrir skemmdum frá nálægum búnaði. Eftirfarandi er nauðsynlegt að hafa í huga við staðsetningu og meðferð á própanhylkjum.
- Ef eldsvoði verður má staðsetning hylkis ekki vera fyrir rýmingarleiðum
- Hitastig þar sem hylki er staðsett má ekki fara yfir 40°C
- Staðsetjið hylki minnst 1 m frá ofni, arni, kæliskáp eða annarsstaðar þar sem própan logi er nýttur. Leyfilegt er að minnka þessa fjarlægð í 0,5 m ef sett er upp skilrúm úr eldverjandi efni milli hylkis og logans á notkunarstað.
- Hylkið skal staðsetja minnst 0,2 m frá ofnum og öðrum hitagjafa.
- Nægjanleg loftræsting skal vera til staðar þar sem própanhylki eru geymd.
- Við notkun própans í flytjanlegum búnaði sem og í ferðabílum skal hylkið vera vel fest með þartilgerðum festingum.
- Própan hylki má aldrei geyma eða nota í gufubaðsklefum.
Leyfilegt er að staðsetja própanhylki inn í eldhúsinnréttingu ef gengið er frá loftræsti opum í innréttingu bæði að ofan og neðan til. Það er mjög mikilvægt að hylkið sé alltaf í uppréttri stöðu. Þrýstijafnari, loki og annar búnaður er hannaður fyrir notkun á gasfasa hylkisins og þess vegna verður hylkið að standa upprétt.
Í bátum þá skal hylkið ávallt staðsett á dekki, í loftræstum skáp/klefa – eða gasþéttru einangruðu rými í vistarverum bátsins með óhindraðri loftræstingu út úr bátnum.
4. Slöngur
Til heimilisnota, skal própanslanga ekki vera lengri en 1,3 m. Mikilvægt er að nota alltaf slöngur sem uppfylla öll skilyrði og staðla. Slöngur fyrir própangas eru appelsínurauðar.
5. Ef þig grunar leka, athugið með sérstökum lekaleitarúða eða sápuvatni
Própan tækjabúnaður er hannaður þannig að lítil hætta er á gasleka. Própan er náttúrulega lyktarlaust, en í framleiðslu er lyktarefni blandað saman við. Það gerir það að verkum að leki uppgötvast mjög fljótt sem minnkar líkur á eldsvoða. Uppruna lekans er auðveldast að finna með sérstökum lekaleitarúða sem úðað er á slöngur og samskeyti. Einnig er hægt að nota upplausn úr sápu og vatni. Ef lekur þá myndast loftbólur. Lokið strax fyrir gashylkið. Ef þrýstijafnarinn lekur, skaltu skrúfa fyrir hylkið og skipta um þrýstijafnara.
Verjið hylkjalokann
Sérstakur tappi skal ávallt vera í gasúttaki þar til hylklið er tengt við einhvern búnað. Ef hylkið er síðan aftengt búnaðinum í lengri tíma skal tappinn settur aftur í gasúttakið til varnar mögulegum leka. Þessi tappi á ávallt að vera í hylkinu við flutning. Munið að loka vel fyrir hylkjalokann.
Eftirlit og viðhald
Athugið allan búnað og aukahluti árlega. Athugið að öll tengi séu þétt með sápuupplausn eða lekaleitarúða (aldrei með logandi eldspýtu). Gasslönguna má athuga með því að brjóta hana saman. Ef þú uppgötvar sprungur þar sem hún er brotin saman, skiptið þá slöngunni strax út fyrir nýja. Viðhald og viðgerðir á gastækjum og búnaði sem og lagnakerfum fyrir própan skal eingöngu vera framkvæmt af fagmönnum.
Notkun própanhylkja - Users' ABC - Propane cylinder users' ABC
When directions for use are followed, propane is very safe to operate and a safe source of energy. The risks with using propane are primarily caused by incorrectly fitted equipment, deficiently maintained equipment or the use of non-approved equipment. We only supplies equipment and accessories approved by the authorities.
1. Read the directions for use
Ensure that you follow the directions for use before you install and start to use propane equipment. If you are uncertain about anything, contact your supplier. Do not attempt to repair any faults on the equipment, pressure control or cylinder yourself.
2. Storage of propane cylinder
- It is permitted to store maximum 25 kg propane, e.g. two 11 kg cylinders, in housing spaces or a garage above ground. The largest permitted cylinder size is 11 kg.
- Gas cylinders may not be stored in the attic, cellar or space below ground level, nor may propane be stored in caravans, boats or equivalent spaces used for accommodation.
- Always keep the cylinder in an upright position in a place where it isn't exposed to heat or mechanical damage. Propane cylinders shall be stored in a locked space or other place with restricted access. The propane cylinders’ stocking or storage space shall have appropriate ventilation.
- No gas cylinders under the grill
Gas cylinders may not be used or stored under a hot gas grill, since the outer temperature of the cylinder may not exceed +40°C. Close the cylinder’s gas valve when you are not using it. Always use and store the gas cylinder in an upright position.
3. Positioning of propane cylinder
Always keep the propane cylinder in an upright position when in use. During storage or use cylinders shall be placed so that they are not exposed to heat and mechanical damage. The following must be observed when positioning and handling the cylinders:
- In the event of fire the cylinder must not prevent evacuation of premises
- The cylinder’s outer temperature may not exceed 40 °C
- Position the cylinder at least 1.0 meter from oven, fireplace or other equivalent fire source. The distance may be 0.5 meters if there is a protection made of fireproof material between the cylinder and the fire source.
- The cylinder shall stand at least 0.2 meters from hot surfaces such as ovens and heating elements
- The cylinder’s storage space shall have adequate ventilation
- Upon use in portable or mobile spaces, the cylinders that are connected to the equipment shall be securely fastened
- The propane cylinders may not be placed in a sauna
The propanecylinder can, for example, be placed in a kitchen cupboard with ventilation openings in the upper and lower parts. It is important that the cylinder is always kept in an upright position since adjustment of pressure control, valve and accessories is made according to the gas conditions.
In boats, the propane cylinder must be placed on deck, in a ventilated cupboard/box – or a gas-sealed insulated space in the boat’s accommodation section which must have ventilation going directly out.
4. Hoses
In the household, the hose length between the cylinder and the equipment used shall be maximum 1.2 meters. NB! Always use hoses that meet the standard. Propane hoses are orange.
5. If you suspect a leak, check for air-tightness with a leakage detector or soapy water
The propane equipment issues an efficient warning regarding possible gas leaks. Propane in its natural state is odorless but an odorant added has usually been added. This enables you to discover any leaks in time to minimize the risk of fire. You find the leak fastest by spraying AGA’s leak detection spray on hoses and joints or by wiping them with soapy water. If the joint leaks, the soapy water starts to bubble. Close the gas cylinder’s valve immediately. If the leak is in the pressure control, the cylinder must be moved for airing in an open and airy space, without open flames or other heat sources or outlets in the vicinity.
Valve protection
The valve protection shall always remain on the cylinder until the cylinder has been connected to the equipment being used. When the cylinder is disconnected from the equipment for a lengthy period, the control is also removed and the valve protection put back in position. During transportation, the valve protection shall always be in place in order to protect the valve.
Inspection and maintenance
Check equipment and accessories annually. Check that the joints are sealed by using soapy water or AGA’s leak detection spray (never with a burning match). The gas hose may be checked by bending it. If you discover cracks in the bend, replace the hose with a new one. Maintenance and repair of the equipment used and the fixed gas equipment’s pipe system many only be carried out by an approved installation company.
Propane equipment
Keep the equipment, valves and burners clean. When the propane burns well, the flame is blue and the center of the flame is blue-green. If the top of the flame is yellow, the burner is not getting enough air. An open flame uses oxygen and that is why propane equipment may not be used in confined spaces without an adequate air supply.
If the flame doesn’t light, make the following checks:
- Check that the propane cylinder’s valve is open
- Check that there is gas left in the propane cylinder. The composite cylinder immediately reveals whether the cylinder is empty. Aluminum and steel cylinders can be weighed. The empty cylinder’s weight (tare) is stamped on the upper part of the cylinder.
- Check whether the equipment’s burner part is clogged by cooking oil, dust or similar
- If you use a piezo lighter, check that it is working properly
- Check that the pressure control is properly connected